What shapes the cost of a vinyl car body wrap — vehicle size, film type, coverage area and trim complexity. Base rate from 6900 ₾ and what it covers.
Vehicle size, vinyl grade, coverage area and body complexity - four levers that take the quote from the base rate to the full sticker.
A vinyl car body wrap in Tbilisi, Georgia is not a flat price and not a "per square metre" line item. On the same vehicle the total can shift 30-40% depending on film grade, coverage, and the number of complex panels. This breakdown covers exactly what shapes a car wrap cost, how a sedan differs from an SUV, and what gets itemised on top in practice. All figures are current for 2026; Auditoria Detailing pricing appears as its own block.
The starting rate for a vinyl wrap at Auditoria Detailing is from 6900 ₾. That figure is not abstract: it is priced for a full wrap on a mid-size sedan (nominal C-segment: Camry, Passat, Civic) in a mid-tier gloss or satin film. It includes: removal of door handles and trim where a seam-free method requires it, body prep (wash and degrease), the actual wrap with heat-forming on curves, refitting of all hardware, and handover with before/after photos.
From that base rate the price moves along four parameters:
Vehicle size and class - SUVs and crossovers need 20-40% more material and labour
Film type - carbon, chrome and specialty finishes cost more than a standard gloss
Coverage area - partial (hood + roof + bumper) or full (entire body)
Body complexity - number of mouldings, mirrors, sharp curves and seams
The specific figure for your car is set at in-person inspection. A photo is not enough: a matte black sedan looks the same in a picture whether the body is intact or has a scratch under the right pillar. The full price block for vinyl wrapping is on the service page - car wrap.
Body surface differs meaningfully between classes, and that is direct material cost. A subcompact (Yaris, Fabia, Corsa) takes 15-18 square metres of vinyl. A mid-size sedan - 18-22 m². A compact SUV (Qashqai, RAV4) - 22-26 m². A full-size SUV like X5, Q7, Touareg - 28-32 m². A pickup or van - 35-40 m².
The roll difference alone meaningfully shifts the base rate. More significant is the labour delta: a tall-roof, long-side SUV needs 4-6 extra hours of hand work because each panel takes longer to pull taut, and roof ribs usually need heat-forming.
Approximate ranges for orientation (final price set at inspection):
B-segment hatchback (Yaris, Polo) - from 6900 ₾
C-segment sedan (Camry, Passat) - from 6900 ₾
Compact SUV (RAV4, Qashqai) - above the base rate
Full-size SUV (X5, Q7) - noticeably above the base rate
Pickup or van - quoted individually at inspection
The vinyl itself varies by finish, manufacturer and warranty. A roll of premium film across the same area can cost 2-3x the budget alternative. Georgian studios typically run premium European lines - quality comparable to leading industry standards.
Technically: quality vinyl is 70-100 microns thick (premium is a stable 80-90 microns; budget films more often at 60-75 with wider batch variance), uses cast adhesive, and carries a top laminate for UV and scratch resistance. Three characteristics to focus on: film type (cast vs calendered), presence of laminate, and the manufacturer warranty.
Finish grading relative to standard gloss:
Standard gloss - base price, no markup
Satin / matte - usually the same price as gloss (sometimes +5-10% in the premium segment)
Pearl / chameleon colour shift - +15-25%
Carbon 3D / 4D - +10-20%
Metallised chrome - +30-50% (rare material, harder to apply)
Satin-metallic brushed-steel effect - +20-30%
Carbon is its own conversation. Standard 2D carbon (embossed pattern) is cheaper than 3D or 4D with raised depth. The higher grades look better in person but are harder to lay on curves - they take more skill and time, and that folds into the price.
On warranty: the premium segment offers 5-7 years of colourfastness, budget lines typically 2-3. In Tbilisi conditions, with summer dust and UV, the gap shows: a budget film may fade slightly after 3-4 years, while a premium film holds 7 years with no visible change.
A full body wrap is not always the answer. Partial wraps cover 3-4 typical requests.
Accent colour change. Hood + roof + mirrors in a contrasting colour — for example, a white car with a black-gloss "outline". Area: 4-6 m². Final price quoted at inspection by specific panels.
Front-group protection. Hood + front bumper + front fenders under vinyl — covers the zone most exposed to stone chips. Cheaper than PPF. Priced per-panel at inspection.
Roof only. A panoramic or standard roof in black gloss or satin is a common cosmetic move, especially on white and silver cars. Quoted as its own line item at inspection.
Chrome delete. Black vinyl over chrome mouldings, grilles and window trim. Price depends on part count — quoted at inspection.
A full wrap means colour change across the entire car — every door, sill, edge and visible panel. It costs more than proportional to area, because each added panel meets another with a seam, and more seams means more time.
Two same-class sedans can differ meaningfully on geometry alone. At inspection the technician looks at:
Mouldings and trim — every rubber or plastic strip comes off and goes back on. 20 minutes × 8 mouldings = 2-3 hours
Mirrors with integrated turn signals — pulled entirely; seaming around them looks poor
Heavy sills — long curved sides need heat-forming, adding 1-2 hours
Complex pillars — D-pillars on hatchbacks, C-pillars on coupes need trimming
Body kit / aero — wing, skirt, diffuser — each quoted as an add-on at inspection
Existing paint defects — chips and orange-peel patches need prep first
Vinyl does not fill defects: a deep chip still shows through under raking light. In those cases we recommend car polishing first (+690 ₾) or PPF for vulnerable zones, which is thicker and hides fine imperfections.
Timelines by scope and class:
Hood and bumper only — 1 working day
Partial wrap (hood + roof + mirrors) — 1-2 days
Full sedan wrap — 2-3 days
Full SUV wrap — 3-4 days
Complex projects (rare colours, specialty finishes) — up to 5 days
The car stays at the studio for the full cycle — vinyl needs a single uninterrupted thermal and tension cycle. Parking at both Auditoria Detailing studios is free and the car can stay overnight.
Three different jobs:
Vinyl wrap — temporary colour for 5-7 years, preserves clearcoat, removes cleanly. From 6900 ₾.
Repaint — permanent, indefinite lifespan, replaces factory clearcoat (affects resale in Georgia, where VIN inspection flags body history). We do not offer repainting.
PPF colour change — polyurethane film in a chosen colour, 10-year lifespan, protects against chips. From 9000 ₾. More expensive than vinyl but combines protection and colour change.
Temporary colour change with no consequences for the body — vinyl. Protection plus new colour together — car ppf. Permanent change with acceptance of VIN complications at resale — repaint.
From 6900 ₾ for a full standard-finish vinyl wrap on a mid-size sedan. SUVs — above the base rate. Premium finishes (chrome, chameleon, carbon 3D) — +15-50% on top. Partial hood-and-bumper wrap priced per panel at inspection. Full price block: car wrap. Final figure is set at in-person inspection.
Same-class cars differ by geometry — mouldings, pillars, clearcoat, side-panel size. Heavy doors with chrome handles, long sills and body kit add 2-6 hours of labour. A 10-25% spread between same-class cars is normal.
No, if removed on time. Quality premium-segment vinyl removes cleanly within 5-7 years with no residue. Budget films may leave marks after 3-4 years — adhesive hardens under UV and tears off with paint.
Yes, but film does not fill defects. Deep chips show through vinyl under raking light. We recommend car polishing first or PPF for vulnerable zones — it is thicker and hides fine imperfections.
Full sedan — 2-3 days; SUV — 3-4 days; complex finishes — up to 5 days. Partial wrap (hood + bumper + roof) — 1-2 days. The car stays for the full cycle; parking is free and overnight drop-off is available.
Vinyl car body wrap pricing in Tbilisi is built from four pieces: vehicle size (material and hours), film type (gloss is base, carbon and chrome cost more), coverage (partial or full) and body complexity (mouldings, pillars, sills). The 6900 ₾ base rate covers a mid-size sedan in a standard finish; SUVs, premium films and full projects push it higher.
Key takeaways:
Base car wrap at Auditoria Detailing — from 6900 ₾ on a sedan
Premium finishes (chrome, chameleon, carbon 3D) add 15-50% on top of base
Partial wrap (hood, roof, bumper) quoted per-panel at inspection
Lead time — 2-4 days for most cars, up to 5 days for complex projects
Final price is set at in-person inspection; a photo does not replace measurement
Contact Auditoria Detailing today.
Vinyl Wrapping → Prices → Back to BlogAUDITORIA DETAILING
Address: 83 Ilia Chavchavadze
Hours: Mon–Sat 11–20